La -Mech

1/1 3A Block 6 PECHS

Karachi, Sindh, Pakistan

+92 300 200 9787

24/7 Customer Support

Mon - Fri: 9:00 - 17:30

Online store always open

INSULATION FLEXIBLE HOSE

What does INSULATION do?

Insulation of high-performance flexible EPDM closed-cell elastomeric mechanical insulation for building mechanical systems such as HVAC piping, VRF, refrigeration, chilled water, duct liner/wrap, and plumbing piping & equipment.

It is a highly flexible, closed cell insulation based on EPDM. It impresses with its outstanding material properties such as high resistance to weather, UV and ozone, excellent heat resistance, and a particularly low heat loss value.

INSULATION Accessories

Insulation Seal

Insulation is a Modified Neoprene Contact Adhesive specially formulated for bonding. Also ideal for use with other materials such as Metal (painted or unpainted), Cork Board, Polyurethane Foam, Rigid PVC Sheet, Formica, Melamine Board or Rubber Sheet. The high water vapour resistance and good weathering resistance of this seal can prevent water or moisture from penetrating the joints. It forms a strong, firm and permanent bond between the applied materials providing long lasting service.

Insulation tape

Insulation tape is a flexible and self-adhesive insulation foam tape, which is made from the same elastomeric material. Ideal for wrapping hot or cold piping and fittings. Energy-efficient and very easy to use. Excellent for preventing condensation problems. Designed specially for retarding heat loss in hot piping and preventing heat gain or frost formation on cold, chilled water piping or refrigeration lines. Adheres firmly to all metals. No problem of delamination. Insulation is specially coated with primer on the non-adhesive side for a long service life

Insulation Air tape

Air tape Insulation Cork Tape is specially designed for all types of climates. It insulates cold pipes for all kinds of air conditioners used in cars and homes, freezers, and refrigerators. Helps stop condensation problems. Ideal for retarding heat gained in cold pipes and preventing heat loss in hot pipes. Air tape Insulation Tape is an effective sound dampening material and can also be used for gasketing purposes. Air tape Insulation Tape sticks to all kinds of dry metals. It seals tightly without drying. It is flexible and will not shrink or melt within the service temperature of–29oC to 93oC.

Insulation coat

This coat is a water-based paint formulated with selected pure acrylic emulsion mixed with other special chemicals. Excellent for coating onto insulation surfaces giving greater protection against ultraviolet rays or other adverse weather conditions. Available in shades of white, blue, green, yellow, red, and black. This coat can also be painted onto pipe insulation surfaces for easy identification of the different pipe functions

Por tape

Portape is an EPDM-based self-adhesive tape, specially made for adhering the joints of Aero flex tubes and sheets. Protape provides extra holding strength to the joints and serves as a vapour barrier to prevent atmospheric moisture to penetrate the seams. It is flexible, easy to wrap or patch tightly to the insulation surface.

Insulation fix

Insulation fix is a polymeric rigid foam Pipe Hanger with a foam tape inner lining, that absorbs vibration of operating pipes. The outer covering consists of a special rubber tape that seals the hanger completely after installation to prevent moisture penetration. Its strong closed cell structure is ideal for insulating hangers specially for cooling pipes to prevent condensation and save energy.

Insulation stand

The insulation stand is made from natural rubber blended with EPDM synthetic rubber and is a load support specifically designed for air-conditioning units. This stand possesses both high compressive strength and good weathering resistance. It is very effective in reducing vibration and noise levels. This stand can withstand loads of up to 50kgs per piece.

Above stand Specifications

Tensile Strength: Minimum 6.5 MPa
Elongation : Minimum 250%
Hardness :70 ± 5 Shore A Compression Strength @ 10% Deflection : Minimum 0.75 N/mm2
Maximum Compression Strength : Minimum 5.0 N/mm2
Tear Strength : Minimum 15 kgf/cm
 
 
 

Closed Cell Sheet Insulation

Insulation Sheet

Insulation Rolls

Tapes –Paints –Anti-Vibration

Tapes

Adhesive and Paints

Need Help With Easier Industrial Solutions? We Are Experts!